skip to main
|
skip to sidebar
J30 - Rattle and Hum
The rebuild of a 1979 J/30. Hull number 124.
Saturday, February 2, 2008
Rebuilding the Rudder
Rebuilding Rattle and Hum's Rudder:
The above pictures illustrate the stress cracks in the rudder.
0 comments:
Post a Comment
Newer Post
Older Post
Home
Subscribe to:
Post Comments (Atom)
Blog Archive
►
2009
(1)
►
February
(1)
2008 Pics before Launch
▼
2008
(16)
►
May
(1)
Keel - Building out the leading edge and planing t...
►
April
(5)
Templating the Keel
Hull Update - All that is left is the polishing
Epoxy barriered holes for the deck hardware
Hull Liner Primed and Painted
95% of the hull is now faired
►
March
(2)
Removing the antifouling
Templating the rudder - Phase 2
▼
February
(7)
Fair the rudder using template
Rudder - Balsa and skin completed on one side
Rebuilding the Rudder - continued
Cutting open the rudder - Summary
Rudder - Opening up the port side.
Rudder: Opening up the starboard side
Rebuilding the Rudder
►
January
(1)
Thanks DAD!!
►
2007
(27)
►
November
(13)
A Quick Update
Polishing the Port Side Hull
Cutting (sanding) the port side
The Hull Paint....NOT GOOD ENOUGH!
She is back home
Painters Tape Removed
The non-skid
Shooting Awlgrip Whisper Grey on the deck
Another 2 coats of Vivid Red
First 3 coats of Vivid Red
The primer has been sprayed
The J30 is finally under a roof!
Hull sanded and ready for primer
►
October
(5)
First Pass completed
Starting to board sand the hull
Thu-Hulls in the Transom
Refinishing the Woodwork - Work taken on by my Fat...
The Fairing Process - Sanding 2nd and Applying 3r...
►
September
(9)
The Fairing Process - Sanding the 1st Pass
The Fairing Process: First Pass
Port Side
The Bow - going to Starboard
Cabin Top (Part 2)
Rebuilding the cabin top
Deck Hardware Removed
Cutting out the Rotten Core from the Transom
The Boat was purchased in July 2007. She was prevo...
About Me
Rattle and Hum
View my complete profile
0 comments:
Post a Comment